Tile Master Equipments
1. While leveling the tiles during laying process, it is not advisable to tap the tiles with a normal hammer & with the handle of the hammer.
2. Rubber Hammer is suitable for the said use without causing any damage to the tiles like breakage
1. Bonding of Tile with Cement can be done without breaking the Tile
2. No air gap because of Uniform Layer of cement.
Manual Tile Cutter
1. 610 mm cutting length and 12mm thickness
2. Chromed and rectified steel guides, with anti-corrosion treatment
3. Supplementary base for the correct support of the pieces with moving breaking system
4. Includes scoring wheel 6mm tungsten carbide
5. Base with shock absorption affect.
6. Direct vision of scoring and cutting line
7. 6mm to 10mm scoring wheel adaptable
1. Specially for porcelain tiles, mosaic, vitrified tiles and other materials.
2. The special nippers designed for every materials & type of use is also well worth highlighting
3. Made with highly durable & precise Wide edges, the highly specialized range of nippers for tiling & ceramics.
1. For marking the position of the holes for tubing and electrical fitting from the wall to tile.
2. Maximum length is 18 inches
3. It calculates both quickly and accurately where to place round and square holes in ceramic tiling, with no need to take measurements or make tracings with the errors that this may involve.
By merely adjusting the template in the place where the ceramic tile is to go, and then transferring the template to the ceramic tiling to be cut, one can get the exact hole position.
1. For easy adjustment and leveling of the rule for wall tiling.
2. In box of 2 units.
3. 20 inch(50 c.m)
4. When laying tiles in walls, these supports will hold the ruler where you'll place the first line of tiles.
5. These supports are designed to easily place the ruler, level it and make any corrections.
Template Diagonal Tile Laying
1. For laying ceramic tiles diagonally.
2. Blister pack of four unit.
3. This is very handy template for laying the tiles diagonally on the wall, without repeatedly checking & measuring each layer of tile laying.
1. Ergonomic handle with electroplated wide plates with high resistance to abrasion is very effective in cleaning cement mortar & grouts between tile joints.
2. The tool is adjustable in width to meet the requirements may be used in 1,2or 3 wide plates to suit the joint width)